Performance peak in GFLOPs for the Xeon

[ZAlno]

What is the peak performance in GFLOPs for the

Xeon E5-2650 v1 and E5-2697 v2

is there any table of comparison available to see

the performance peaks in GFLOPs for the Xeon E5 family.

[Emeth_O_Intel]

Hello,

Thank you for contacting Intel Xeon Community Support.

I will double check this information, and as soon as possible I will be contacting you back in order to proceed with the next step.

Best regards,

Emeth O.

Intel® Server Specialist.

[Emeth_O_Intel]

Hello,

Below are the Gigaflops (GFLOPS), Adjusted Peak Performance (APP), and Composite Theoretical Performance (CTP) values for Intel® Processors (32-bit and 64-bit). Find trade classification information for Intel® Microprocessors."

Look for the Xeon part, this should include the information your are looking for.

NOTE:

• Check the Discontinued Products If you are unable to find your processors in the tables.
• For unlisted processors, or any other questions send APP and GFLOPs email inquiries to export.classification@intel.com, and send CTP email inquiries to eterminations.ctp@intel.com.

Best regards,

Emeth O.

Intel® Server Specialist.

[Emeth_O_Intel]

Hello,

I would like to know if the information provided helps you to clarify your questions.

Please if you have more questions do not hesitate and let me know and I will be more than happy to assist you.

Best regards,

Emeth O.

Intel® Server Specialist.

[ZAlno]

Yes the table answered many of my questions. Thanks !

i have another question regarding the PCI-E x16 Gen3. I have Quanta STRATOS S210-X12MS rack and it have only one PCI-E x16 Gen 3 slot.

I was thinking about to upgrade the rack with Phi x100 cards ( specifically the Phi 7110p cards ). Can i upgrade the existing PCI-E slot with

PCI Express to USB Card like this one connected to 4 Phi cards through this USB solution.

If the PCI-E X16 Gen3 data lanes is to be splitted how mane lanes is required for each Phi x100 card connection ( each PCI-E X16 Gen3 lane is 2 Gbps connection speed ).

Will the system be able recognize all the cards as individual cards ready for computing tasks.

Best regards...

[Emeth_O_Intel]

Hello,

Thank you so for replying back.

I was reviewing you question and unfortunately this specific configuration you are planning to acomplish is not supported or recommended by Intel. As a matter of fact, this specific component was discotinued on 2014.

On the other hand, if you are still planning to use those components my best recommendation will be to contact the server manufacture in order to verify the compatibility.

Best regards,

Emeth O.

Intel® Server Specialist.

[Emeth_O_Intel]

Hello,

I am following up your thread and I would like to know if you have more questions.

If so, please do not hesitate and let me know and I will be more than happy to assist you.

Best regards,

Emeth O.

Intel® Server Specialist.

[Emeth_O_Intel]

Hello,

I was reviewing your case and due to the fact that I have not seen any activity recently, I am going to proceed and close this thread. If you have more questions do not hesitate and contact us back and we will be more than happy to assist you.

Best regards,

Emeth O.

Intel® Server Specialist.