- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi!
So first things first, a week ago I purchased this processor (and all other necessary components), here is my configuration:
Gigabyte GeForce GTX1080 G1 Gaming 8GB
ASUS STRIX Z270H GAMING
Intel Core i7-7700K "Kaby Lake"
Be Quiet! Dark Rock Pro 4
Cooler Master GM-Series G750M 750 Watt
Corsair Vengeance LPX Schwarz 16GB DDR4 Kit (2x8GB) 3000MHz (working with freq. 2133Mhz)
Samsung SSD 850 EVO (Basic) Series 500GB
WD Red WD30EFRX 3TB
Corsair Carbide Clear 400C
I used bunch of programs (Aida64, HWMonitor, Speedfan, Afterburner and even Intel XTU) to measure its temperature, and each of them showed the core temperature from 90 to 100C during CPU stress test (and also in PUBG, in RS: Siege etc.)
BUT! Speedfan shows that my CPU doesn't heat above 65C. The same is shown by HWMonitor about CPUTIN, however, temperature package (CPU and Core temps) is again 90-100C here, and I think programms would like to show even higher temperature, but they just can't, 100C is their limit ((:
And if this is an explainable behavior during a stress test, 90-100C during fast any game ... This is too much.
Can temperature ALL monitors show incorrect values? How can I check the actual CPU temperature during heavy load?
Intel XTU says that my CPU passed stress test.
That scares and surprises me, because when I touch CPU fan or air from it, it's hardly warm.
Thank you in advance.
- Tags:
- HP Desktops
Link Copied
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello Sicerat
Thank you for joining the community.
I see that you are having high temperatures reported on the system, allow me to help you with the inquiries.
Could you provide me with the results of the Intel® processor diagnostic tool? Download and run test, once the test is complete ted go to file>view results file. Save the .txt file on your desktop and attach the file to the thread.
Please refer to the following link to download the tool: https://downloadcenter.intel.com/download/19792/Intel-Processor-Diagnostic-Tool https://downloadcenter.intel.com/download/19792/Intel-Processor-Diagnostic-Tool.
I would like to gather more information about the configuration you have on the computer. Please attach to this thread the TXT file the Intel® System Support Utility will generate: https://downloadcenter.intel.com/download/25293/Intel-System-Support-Utility https://downloadcenter.intel.com/download/25293/Intel-System-Support-Utility
Steps to save the report:
- Run the utility.
- Click on "Scan" to get the scanned system.
- Once the scan is complete click on "next".
- Use the "save" option, save the report to your desktop.
- To attach a file, you must click the "Attach" option on the bottom right-hand corner of the response box.
Are you having any error reported? If you do please provide me with more details if the errors.
Regards,
Leonardo C.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi!
Sure. I attached that as a file.
No, I didn't receive any errors at all.
Thank you!
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello Sicerat
Thank you for your response.
Upon reviewing the report I see that the Intel® processor is passing successfully the test, on the other hand, I would like to share with you the Overheating Warning Signs (https://www.intel.com/content/www/us/en/support/articles/000005791/processors/intel-core-processors.html https://www.intel.com/content/www/us/en/support/articles/000005791/processors/intel-core-processors.html), please let me know if you find any of this sings on your system, please review this following link for Troubleshooting Overheating Issues for Intel® Boxed Processor (https://www.intel.com/content/www/us/en/support/articles/000005776/processors/intel-core-processors.html https://www.intel.com/content/www/us/en/support/articles/000005776/processors/intel-core-processors.html) make sure that your system complies with these steps.
Hope this help.
Best Regards,
Leonardo C.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello Sicerat
I was checking your case and would like to know if you need further help. If so, please do not hesitate in replying back.
Regards,
Leonardo C.

- Subscribe to RSS Feed
- Mark Topic as New
- Mark Topic as Read
- Float this Topic for Current User
- Bookmark
- Subscribe
- Printer Friendly Page