About pin processing of unused input pins for Cyclone V.

[YTsuj6]

FPGA:Cyclone V (5CEBA7F23C7N)

Can I use the input setting IO pin in the open state when it is not used?

There is a model where the FPGA circuit is common and the external circuit is different, so the settings are common.

[ShafiqY_Intel]

Hi YTsuj6,

The Unused Pins must connect as defined in the Quartus Prime software.

Below are the options for unused pins:

Thanks

[sstrell]

You can also set this on an individual pin-by-pin basis using the Pin Planner. Right-click a pin in the Package View, go to Reserved Pins, and select an option.

#work4intel