Programmable Devices
CPLDs, FPGAs, SoC FPGAs, Configuration, and Transceivers
20637 Discussions

Arria 10 PCI-e Example design AN690

SK_VA
Beginner
572 Views

Hi ,

 

I am using PCI-E example design for Arria 10.

 

From the signal tap I could see serdes_pll_locked is high and tx_st_ready is high.

 

But rx_signaldetect is low.

 

I have assigned the Perstn input to the top level design high.Please help me understand what is going wrong.I am not sure whether PCI-E is enable d on the host side.

 

0 Kudos
2 Replies
BoonT_Intel
Moderator
346 Views

Hi, probably you can use this checklist: https://forums.intel.com/s/createarticlepage?articleid=a3g0P0000005RVNQA2&action=view&language=en_US

Usually it is related to the setting from host side because no response from the host side.

Since you are using the common clock from mother block, you need to enter the BIOS and set the PCIe slot correctly.

0 Kudos
shanx1
Beginner
346 Views

Has it been solved?I have the same problem.

0 Kudos
Reply