Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Valued Contributor III
698 Views

Arria II GX VCCIO and Quartus I/O Standard Mismatch

In an existing design, I have discovered the following: I am using an Arria II GX FPGA and have the VCCIO for one of the banks tied to +3.3VDC on the baord. The VREF pin for this bank is also connected to +3.3VDC. Within Quartus, I have the "+2.5V" standard selected.  

 

Questions: 

1. Is this an acceptable scenario, or could this potentially cause damage to the FPGA? 

2. Will the inputs on this bank be subject to the +2.5V input threholds as identified in the device handbook, or the +3.3V thresholds (or some other threshold values)?
0 Kudos