I am trying to run the a Cyclone V 5CGXFC5C6F27C7N using the PLL at 500Mhz. How does this part react to that clock frequency? Has any one done that, also I'm using it on the Terasic Cyclone V GX Starter Kit.
Hi,The value is under the specification you can operate at 622 MHz. Normal operation is expected. But limited in the Quartus Prime software by the I/O maximum frequency. The maximum I/O frequency is different for each I/O standard. Best Regards, Anand Raj Shankar (This message was posted on behalf of Intel Corporation)