- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Link Copied
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi Liran,
Instead of selecting "Examine", can you please select "Program/Configure" for programming?
Regards,
YL
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi,
This card is working and i am affraid to erase the program that is already loaded to the epm7256,
Examine shall not work?
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi Liran Fun,
Examine is not meant for programming / burning. If thats the case, i would suggest you to burn SOF file into the device as it is volatile.
Regards,
YL
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
This is a CPLD device, which is EEPROM based, not SRAM based. It uses a .pof file for programming, NOT a .sof file.
The option you could try is a VERIFY of the programmed device versus a known .pof file, if you have one.
The only other option is to reprogram the CPLD with a .pof file and do a verify after programming to validate it programmed correctly.
There is no way to download a new temporary file to try it without completely reprogramming the device.

- Subscribe to RSS Feed
- Mark Topic as New
- Mark Topic as Read
- Float this Topic for Current User
- Bookmark
- Subscribe
- Printer Friendly Page