- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi,all
I design a digital image precessing board using the Cyclone V 5CEBA4U15I7N. It works well at normal temperature. It don't work under -15℃ when there is no FPGA work current. But it's OK for the power voltage,power sequence and oscillator frequence under -15℃. what's the reason? Thank you for your reply. Best regards. Jimmy- Tags:
- Cyclone® V FPGAs
Link Copied
2 Replies
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
This part is rated to work even at temperatures under -15oC, so it should work.
Are you sure that all the other ICs assembled on this board are really specified to work under such temperature ?- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
I check the other ICs. the problem come from the flash. The flash don't work at the low temperatur.
Thanks for your suggestion.
Reply
Topic Options
- Subscribe to RSS Feed
- Mark Topic as New
- Mark Topic as Read
- Float this Topic for Current User
- Bookmark
- Subscribe
- Printer Friendly Page