DE10-Nano SoC LXDE and custom FPGA

[MR3]

Good day All, I have tried to program the "my_first_fpga" program available on the SystemCD using the USB Blaster, however that stops my Linux kernel (I am assuming it stops running the soc_system.rbf file). I would like to know if it is possible to run a custom FPGA SoC program (a program that uses the FPGA and HPS) on a DE10-Nano SoC running the LXDE version (obtained from Terasic)? Regards, M

[JingyangTeh]

Hi MR3

Sorry you cant flash a custom FPGA SOC program(FPGA & HPS) and have the Linux LXDE running.

However, you could flash only a custom FPGA portion and still have the Linux LXDE running.

Regards

Jingyang, Teh

[JingyangTeh]

Hi MR3

Sorry for the confusion.

After digging further I found some new information.

It is possible to run a bare-metal program and running the Linux Distribution.

DE10 has a Cyclone5 SOC which has a dual CortexA9.

Theoretically it is possible to run a bare-metal program on one core and a Linux Distribution on another.

However we do not support Asymmetrical Multiprocessing.

Regards

Jingyang, Teh

[JingyangTeh]

Hi MR3

Good day!

Do you need any more clarification on this forum?

Regards

Jingyang, Teh

[Mahesh2]

Test

[JingyangTeh]

Linkage to another forum case.

https://community.intel.com/t5/Programmable-Devices/Reply-to-DE10-Nano-SoC-LXDE-and-custom-FPGA/m-p/1399638/emcs_t/S2h8ZW1haWx8bWVudGlvbl9zdWJzY3JpcHRpb258TDVJNFJHMEtMTzM5SU98MTM5OTYzOHxBVF9NRU5USU9OU3xoSw#M85865

[Farabi]

FROM 05527487

Customer confirmed accepted the solution. You can close this case now. 

Author: MR3
Subject: Reply to DE10-Nano SoC LXDE and custom FPGA
Date Posted: July 12, 2022

Hi , I am unable to reply to the post
(https://community.intel.com/t5/Programmable-Devices/DE10-Nano-SoC-LXDE-and-custom-FPGA/m-p/1397551#M85758)
as I am getting a "Authentication failed" message whenever I reply or
try to accept a solution. I just wanted to acknowledge that I will not
need any further clarification. Thank you for your help. Regards.