Programmable Devices
CPLDs, FPGAs, SoC FPGAs, Configuration, and Transceivers
21155 Discussions

Does 1SG085HN2F43E2LG must need to connect the PMBUS?

RXie
Partner
1,245 Views

 Does 1SG085HN2F43E2LG must need to connect the PMBUS?

Is it necessary to connect pmbus pin only if tail is - V?

0 Kudos
5 Replies
Rahul_S_Intel1
Employee
1,086 Views

Hi , 

Does 1SG085HN2F43E2LG must need to connect the PMBUS? >> Yes as per the recommendation,

Kindly find the explanation.

 Intel Stratix 10 devices will not configure or function correctly if the core voltage is driven by a non-PMBus compliant regulator with a fixed output voltage

 

page no: 5

https://www.intel.com/content/dam/www/programmable/us/en/pdfs/literature/hb/stratix-10/ug-s10-pwr.pdf

0 Kudos
RXie
Partner
1,086 Views

Hi

我看了下这个文档,应该是-v的才必须接PMBUS,-L的应该可以不接对吧?批注 2020-03-11 212214.png

0 Kudos
Rahul_S_Intel1
Employee
1,086 Views

Hi Rxie ,

Kindly find the my reply below in details.

For Stratix 10 with support for SmartVID standard power ,you must connect the PWRMGT_SCT and PWRMGT_SDA connect to power management bus.

 

There are other opn in which the power line is fixed, that is L and X , in that there is no support for Smart VID , the power is fixed ,

 

Kindly find the reference in PCG : PAGE NO:28

https://www.intel.com/content/dam/www/programmable/us/en/pdfs/literature/dp/stratix-10/pcg-01020.pdf

 

If the OPN have L or x no support for SMART VID , so connection is not required , hope it clarifies

0 Kudos
Rahul_S_Intel1
Employee
1,086 Views

Hi ,

Let me know if you have any confusion in my reply ,

I am strongly recommend to follow the guidelines which present in the pin connection guidelines Pagno:28 about the pin connection.

https://www.intel.com/content/dam/www/programmable/us/en/pdfs/literature/dp/stratix-10/pcg-01020.pdf

 

0 Kudos
Rahul_S_Intel1
Employee
1,086 Views

Hi ,

 Kindly let me know, if you need further assistance.

0 Kudos
Reply