- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
hi,
here is a puzzle when i use DE2-115 with TRDB-DC2 to capture image. CCD_Capture.v is provided by Terasic in the DE2_CCD project with a resolution of 640*480/60fps. HEX7~0, to display frame counter, is always be all-zero. use signaltap ii to capture CCD_DATA,CCD_FVAL,etc. ,while the datas are all-zero. However, this TRDB-DC2 is worked good with DE2. please help me.thx.Link Copied
1 Reply
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
--- Quote Start --- hi, here is a puzzle when i use DE2-115 with TRDB-DC2 to capture image. CCD_Capture.v is provided by Terasic in the DE2_CCD project with a resolution of 640*480/60fps. HEX7~0, to display frame counter, is always be all-zero. use signaltap ii to capture CCD_DATA,CCD_FVAL,etc. ,while the datas are all-zero. However, this TRDB-DC2 is worked good with DE2. please help me.thx. --- Quote End --- Hello Mr yuhengzhou Please did u solve this problem ? because i'm willing to buy a DC2 card and i've a DE2-115 board thank u
Reply
Topic Options
- Subscribe to RSS Feed
- Mark Topic as New
- Mark Topic as Read
- Float this Topic for Current User
- Bookmark
- Subscribe
- Printer Friendly Page