Programmable Devices
CPLDs, FPGAs, SoC FPGAs, Configuration, and Transceivers
21090 Discussions

MAX 3000A EPM3256ATC144-10N vs MAX V 5M1270ZT144 (Size comparison)

sth125
New Contributor I
805 Views

Hello,


Our hardware group is reimplementing an existing design.  They decided to change some CPLDs from a MAX 3000A EPM3256ATC144-10N  to a MAX V 5M1270ZT144.

I am going to add a 16-bit pulse counter plus some other logic to the existing CPLD logic, so I am trying to ascertain how much bigger the MAX V is than the MAX 3000A part.  I only have a images of the existing CPLD logic so I am not sure how much space the existing design uses.

Here is what I know:

MAX 3000A
--------------
16 LABs
16 LABs * 16 Macrocells/LABs = 256 Macrocells

Macrocell has 5 input product terms and a clocked register


MAX V

--------
127 LABs
127 LABs * 10 LE/LABs = 1270 LE

LE has a 4 input LUT and a clocked register

 

The MAX V seems to be significantly larger, especially given each LE has a LUT. 

am I correct?  How much larger is it?

Thanks,

Stephen

 

Labels (1)
0 Kudos
1 Solution
NazrulNaim_Intel
Employee
709 Views

Hello,


For your information, The EPM3256ATC144-10N has around 2500 logic elements while 5M1270ZT144 has 12000 logic elements. So 5M1270ZT144 is significantly larger than EPM3256ATC144-10N.


Hope that answers your question.


Best regards,

Nazrul Naim


View solution in original post

0 Kudos
3 Replies
NazrulNaim_Intel
Employee
750 Views

Hi,

 

Thank you for reaching out. Allow me some time to look into your issue. I shall come back to you with findings.

 

Thank you for your patience.

 

Best Regards,

Nazrul Naim


0 Kudos
NazrulNaim_Intel
Employee
710 Views

Hello,


For your information, The EPM3256ATC144-10N has around 2500 logic elements while 5M1270ZT144 has 12000 logic elements. So 5M1270ZT144 is significantly larger than EPM3256ATC144-10N.


Hope that answers your question.


Best regards,

Nazrul Naim


0 Kudos
NazrulNaim_Intel
Employee
675 Views

Hi,

 

As we do not receive any response from you on the previous question/reply/answer that we have provided, for now I will set this case to Close-Pending. 

 

Regards,

Nazrul Naim


0 Kudos
Reply