Programmable Devices
CPLDs, FPGAs, SoC FPGAs, Configuration, and Transceivers
19672 Discussions

Programming file compatibility across Speed Grades

JDowd3
Beginner
218 Views

Our design currently uses the 5CEBA2F17C8N.  Can I use the same RBF file in an 5CEBA2F17I7N (faster speed grade) or do I need to recompile and deploy both as required?  Thanks.

0 Kudos
1 Solution
YuanLi_S_Intel
Employee
188 Views

Hi, programming file are speed grade independent. Meaning to say, you can programming the programming file into same device part number with different speed grade.


However, it is recommended to do recompilation with the correct device part number as there might be timing issue.

https://www.intel.com/content/www/us/en/support/programmable/articles/000078612.html


View solution in original post

1 Reply
YuanLi_S_Intel
Employee
189 Views

Hi, programming file are speed grade independent. Meaning to say, you can programming the programming file into same device part number with different speed grade.


However, it is recommended to do recompilation with the correct device part number as there might be timing issue.

https://www.intel.com/content/www/us/en/support/programmable/articles/000078612.html


Reply