Programmable Devices
CPLDs, FPGAs, SoC FPGAs, Configuration, and Transceivers
21328 Discussions

Programming sof using different firmware

Chris039
Novice
1,540 Views

Hi, 

 

The Quartus programmer requires the firmware to program the sof. Does Quartus utilize firmware content during the compilation?

 

Labels (1)
0 Kudos
8 Replies
FvM
Honored Contributor II
1,520 Views
Not quite clear which firmware you mean. Generally Quartus programmer doesn't use firmware, except for USB Blaster II. Its driver (not Quartus programmer) loads a firmware for USB Blaster microcontroller.
0 Kudos
Chris039
Novice
1,483 Views

The firmware is the device firmware used during the sof programming.  It is located in C:\intelFPGA_pro\23.1\devices\programmer\firmware.

Does Quartus use the information in the firmware during the compilation?

0 Kudos
FvM
Honored Contributor II
1,467 Views

Hi,
as far as I'm aware of, "firmware" folder isn't used by Quartus programmer and neither in compilation. It's a toolkit for debugging purposes. In previous Quartus versions, it's located at quartus/common/devinfo/programmer/firmware. 

0 Kudos
Chris039
Novice
1,460 Views

What is the function of these zip files in the firmware folder ? Do we have any use case where the zip is being used?

0 Kudos
NurAiman_M_Intel
Employee
1,377 Views

Hi,



The Quartus programmer requires the firmware to program the sof. Does Quartus utilize firmware content during the compilation?

What is the function of these zip files in the firmware folder ? Do we have any use case where the zip is being used?

  • May I know the reason on why you need to know this information?


Regards,

Aiman




0 Kudos
Chris039
Novice
1,338 Views

Hi Aiman,

 

I just want to understand the usage of the firmware in this folder, when and how it is being used.

0 Kudos
NurAiman_M_Intel
Employee
1,277 Views

Hi,


@FvM response is correct.


Additionally, we are unable to provide further information on this as this is confidential. Apologize for the inconveniences.


Regards,

Aiman


0 Kudos
NurAiman_M_Intel
Employee
1,228 Views

We do not receive any response from you to the previous answer that I have provided. This thread will be transitioned to community support. If you have a new question, feel free to open a new thread to get the support from Intel experts. Otherwise, the community users will continue to help you on this thread. Thank you


0 Kudos
Reply