Setting up wireless communication on Cyclone V

[Matcha]

Hello,

I need to setup wifi communication on a Cyclone V SoCKit. I know that I need some form of wifi interface module and I've been searching for a wifi IP to work with the Cyclone but I cannot seem to find one.

I would appreciate any references or resources to point me in the right direction.

[SyafieqS]

Hi Michael,

I suggest you to go through to link below and select Interface Protocols. From there you can sort the IPs that you require for your design. There you can get more details related to the supports and requirements.

https://www.intel.com/content/www/us/en/programmable/products/intellectual-property/ip.html

Thanks,

Regards

[Matcha]

Thank you SyafieqS, I'll look into and post back here when I have more questions

[Matcha]

---

@SyafieqS wrote:

Hi Michael,

I suggest you to go through to link below and select Interface Protocols. From there you can sort the IPs that you require for your design. There you can get more details related to the supports and requirements.

https://www.intel.com/content/www/us/en/programmable/products/intellectual-property/ip.html

Thanks,

Regards

---

I've had a look through the Interface section of the IP Finder and I see that the ones listed are all Ethernet protocol instead of a wifi or wlan protocol. I know that the Ethernet Layer comes right before the link layer for a physical wired connection. This is probably due to my limited knowledge on the wifi frame but I'm having a hard time making the connection on how an ethernet IP would work for wireless communication.

I also want to state that this is for work and not a school project or anything. I'm just new to the FPGA industry

[SyafieqS · Accepted solution]

Hi Michael,

Sorry I was giving the wrong category, it is in DSP. I found the WLAN IP Core, IEEE 802.11n/ac LDPC Decoder from Creonic (Intel DSN Partner)

https://www.intel.com/content/www/us/en/programmable/solutions/partners/partner-profile/creonic/ip/ieee-802-11n-ac-ldpc-decoder.html

You can refer to that for documentation, IP metric details and can contact Creonic for additional services and features. Refer to link below for contact.

https://www.intel.com/content/www/us/en/programmable/solutions/partners/partner-profile/creonic.html

Thanks,

Regards