Software for Flex 10ka

[ossa]

Which software program should I use to program my flex10ka chip?

[FvM]

Hi,
existing binary files can be still flashed to configuration devices (EPC1, EPC2, EPC1441) or volatilely downloaded to Flex10k with  recent Quartus programmer tool. Compilation of Flex10k designs is only possible with legacy MAX+PLUS II software.

[ossa]

Can the EPC1441P18 device be programmed with  a usb blaster?  If it is programmed, how to program it? How to make connections?

[FvM]

Previous information was a incomplete. Only EPC2 and EPC16 are reprogrammable flash devices with JTAG interface. EPC1 and EPC1441 have OTP memory and can be only programmed through Altera APU and some third party programmers. 

[ossa]

To put it briefly, there is a card with a Flex 10KA chip.This chip use with  EPC1441P18. And I need to make changes to the software of this chip. How can I do this? 

[Farabi]

"We sincerely apologize for the inconvenience caused by the delay in addressing your Forum queries. Due to an unexpected back-end issue in our system, your Forum cases, along with others, did not get through as intended. As a result, we have a backlog of cases that we are currently working through one by one.

Please be assured that we are doing everything we can to resolve this issue as quickly as possible. However, this process will take some time, and we kindly ask for your patience and understanding during this period. The cases will be attended by AE shortly.

We appreciate your patience and understanding, and we are committed to providing you with the best support possible.

Thank you for your understanding."