Programmable Devices
CPLDs, FPGAs, SoC FPGAs, Configuration, and Transceivers
20705 Discussions

USB Blaster driver conflict with other FTDI kit

Altera_Forum
Honored Contributor II
‎02-22-2008 03:07 PM
8,657 Views

Hi, 

I am using a USB blaster (Terasic) and on the same system I need to use two Asix Presto programmers that use the same FTDI device and (apparently) drivers.  

 

The Presto devices load up and work perfectly, but the (previously working) Blaster shows a yellow icon in Device Manager and Quartus 7.1 can't find it.  

 

Without the Prestos, the Blaster is happy. But I need all of them.  

 

I have heard that this is connected with the way that Altera configures the drivers, and have heard talk of a patch, but have no details.  

 

I would welcome any advice so I can get the devices to coexist.  

 

Thanks 

Malcolm
0 Kudos

Link Copied

21 Replies
SparkyNZ
New Contributor II
‎11-29-2020 09:07 PM
597 Views
In response to avib

@avibI found the easiest solution was to buy a really really cheap USB-serial adapter that doesn't use the FTDI drivers.

This is what I bought in NZ and it solved my problem:

https://www.trademe.co.nz/computers/cables-adaptors/usb/listing-2875681835.htm?rsqid=77fd8861342a4c41915d93b84a55f3cd-002 

In response to avib
Copy link
Reply

Community support is provided during standard business hours (Monday to Friday 7AM - 5PM PST). Other contact methods are available here.

Intel does not verify all solutions, including but not limited to any file transfers that may appear in this community. Accordingly, Intel disclaims all express and implied warranties, including without limitation, the implied warranties of merchantability, fitness for a particular purpose, and non-infringement, as well as any warranty arising from course of performance, course of dealing, or usage in trade.

For more complete information about compiler optimizations, see our Optimization Notice.