- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
I use Quartus II v13sp1 WebEdition. Synthesis is performed for FPGA Cyclone II.
For my diploma work are necessary to know accordance order of LUT pin to Cyclone II pin what I mean!? by adding LUT its pins inside of the physical circuit Cyclone II go in order? Like this: http://www.alteraforum.com/forum/attachment.php?attachmentid=12032&stc=1 or assigned in a chaotic manner or another principle? Like this: http://www.alteraforum.com/forum/attachment.php?attachmentid=12033&stc=1 Why it’s important for my research? I develop the device for which accuracy is critical. If the legs are in a row, and short circuit, I lose accuracy in the senior ranks - and this is very critical for the result if if the legs are in a chaotic in a row, and they will short circuit, I lose accuracy in the junior ranks, it is not critical for me! Thanks in advance for your answers!Link Copied
1 Reply
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
There are no relationship between devices pins and LUT's ports. Also user can't pre-assign any pins to fit with LUT port.
Reply
Topic Options
- Subscribe to RSS Feed
- Mark Topic as New
- Mark Topic as Read
- Float this Topic for Current User
- Bookmark
- Subscribe
- Printer Friendly Page