Programmable Devices
CPLDs, FPGAs, SoC FPGAs, Configuration, and Transceivers
20641 Discussions

max10,is 10m04SAM153i7 compatible with10m04SCM153i7 ?

qd0090
Beginner
462 Views

hi everyone;

my product use  10m04SAM153i7.

since i have to wait a long time if i want to buy 10m04SAM153i7, i want to change it to 10m04SCM153i7.   that is   SA  => SC

i check the pcb design, and compare the device pin-out filesD4.png

the D4 of  the 10m04SCM153i7  should be connected to gnd 

but now the pcb i left it NC

 

is that ok if i replace 10m04SAM153i7 by 10m04SCM153i7 ?

or should i have to change the pcb design

 

 

 

0 Kudos
1 Solution
EngWei_O_Intel
Employee
405 Views

Hi QD

Thanks for your request. If the new device you going to use required a GND connection, then you will need to modify the board. If it is the other way round, i.e. the new device required a NC, then you shall be fine:

https://www.intel.com/content/www/us/en/programmable/support/support-resources/knowledge-base/solutions/rd03132006_933.html

 

Thanks.

Eng Wei

View solution in original post

0 Kudos
1 Reply
EngWei_O_Intel
Employee
406 Views

Hi QD

Thanks for your request. If the new device you going to use required a GND connection, then you will need to modify the board. If it is the other way round, i.e. the new device required a NC, then you shall be fine:

https://www.intel.com/content/www/us/en/programmable/support/support-resources/knowledge-base/solutions/rd03132006_933.html

 

Thanks.

Eng Wei

0 Kudos
Reply