flexran build

[chella]

Hi Team,

During FlexRan build on 20.08 i am getting this error message - 

 ./flexran_build.sh -e -r 5gnr_sub6 -m sd

make[1]: *** [source/phy/lib_dft_idft/CMakeFiles/libdft_idft.dir/all] Error 2
make: *** [all] Error 2

During DPDK setup (Option 39) - running this script - ./dpdk-setup.sh Getting the following error message -

/opt/dpdk-19.11/drivers/baseband/turbo_sw/bbdev_turbo_software.c(23): catastrophic error: cannot open source file "phy_turbo.h"
#include <phy_turbo.h>
^

compilation aborted for /opt/dpdk-19.11/drivers/baseband/turbo_sw/bbdev_turbo_software.c (code 4)
make[6]: *** [bbdev_turbo_software.o] Error 4
make[5]: *** [turbo_sw] Error 2
make[4]: *** [baseband] Error 2
make[3]: *** [drivers] Error 2
make[2]: *** [all] Error 2
make[1]: *** [pre_install] Error 2
make: *** [install] Error 2
------------------------------------------------------------------------------
RTE_TARGET exported as x86_64-native-linuxapp-icc
------------------------------------------------------------------------------

Please help.

Thanks

[Jose_V_Intel]

Hello chella,

Thank you for posting on the Intel Community. 

Based on the information that you provided and in order to better understand your issue please provide the following information:  

1. Please provide an Intel® System Support Utility report in .txt format. (make sure to select all the options before the scan)
2. Provide a system report: https://www.intel.com/content/www/us/en/support/articles/000006351/technologies.html
3. Is the system running any RAID configuration?

Please provide more details about the current issue.

Regards.

Jose V.

Intel® Customer Support Technician

[chella]

Hi Jose,

Here is the information requested -

1. Please provide an Intel® System Support Utility report in .txt format. (make sure to select all the options before the scan) Attahced.
2. Provide a system report: https://www.intel.com/content/www/us/en/support/articles/000006351/technologies.html
   The server is linux and i am not able to see an option for that.
3. Unable to produce this since there is no RAID setup on the server.

[Sebastian_M_Intel]

Hello chella, 

Thank you for your reply. 

I can see that your request is regarding FlexRAN.   

I could see that you already posted the forum in the correct support place https://community.intel.com/t5/Intel-C-Compiler/Flexran-20-08-compile-issue/m-p/1250717  

I will recommend you kindly wait for a response on the above-mentioned thread, we will proceed to close this one from our side.  

Regards, 

Sebastian M  

Intel Customer Support Technician

[chella]

Hi Team,

Please help on this. It has been nearly a month on this.

Thanks.