ESRT 2 SATA & SAS SOFTWARE RAID DRIVE

[BVerd]

Hi!

ESRT 2 SATA & SAS SOFTWARE RAID DRIVE how can i install on bios, since i reformat a hard drive and install a new windows server 2008, when i came to bios set up and enable the mass storage to RAID then it would'nt

work? what are the steps to install the driver ESRT 2 and RST on BIOS intel server board s1200bts? i dont have a brilliant mind to this...how can i know that the driver RAID are install on bios? how will i do to install the raid of 4 drives hitachi?

Thank you!

[Edward_Z_Intel]

You need to configure RAID first, and then install OS on the RAID VD. RAID driver needs to be loaded during OS installation.

The step-by-step demos below will tell you how to do that:

http://www.intel.com/support/motherboards/server/sb/CS-029508.htm Demo: Configuring Intel� Embedded Server RAID Technology II

http://www.intel.com/support/motherboards/server/sb/CS-030677.htm Demo: How to load the Intel� Embedded Server RAID driver during an OS install

[BVerd]

edwardzh,

Many Thanks to you sir..this will be helpful for us.

Thank you very much sir...appreciated much for your technical support.

Seann:)