- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Getting "Flash downloaded image corrupt" trying to upgrade a RS2BL040 RAID controller with current firmware 2.003-0673 from packet 12.0.1-057 July 25 2009. I have downloaded versions 12.14.0-0185,12.14.0-0167,12.13.0-015 several times each and tried doing the flash with the packaged command line tool, and the GUI interface; and got the same error every time. Running the flash from a SUSE Linux 13.2 box.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello,
Please proceed to download and run the following firmware update before going to the latest one and let us know the results:
https://downloadcenter.intel.com/download/19696/6GB-SAS-Hardware-RAID-Firmware-Flash-Update-for-DOS-Windows-Linux-and-UEFI Intel® Download Center
Link Copied
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello,
Please proceed to download and run the following firmware update before going to the latest one and let us know the results:
https://downloadcenter.intel.com/download/19696/6GB-SAS-Hardware-RAID-Firmware-Flash-Update-for-DOS-Windows-Linux-and-UEFI Intel® Download Center
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
The earlier version worked, and then I could do the latest. Thanks.

- Subscribe to RSS Feed
- Mark Topic as New
- Mark Topic as Read
- Float this Topic for Current User
- Bookmark
- Subscribe
- Printer Friendly Page