Hello everyone! We have P4308CP4MHGC server. There blinking orange "!" sign on front panel. What it means? Thank you

[SProk3]

H@ello everyone! We have P4308CP4MHGC server. There blinking orange "!" sign on front panel. What it means? Thank you

[David_A_Intel]

Stepans

It seems our support team contacted you directly through email. I was wondering if you needed further assistance on this one.

[idata]

Hello Stepans,

A blinking amber light on the front panel is normally something non-critical error. Some of this information can be found on the https://www.intel.com/content/dam/support/us/en/documents/motherboards/server/s2600cp/sb/g26942005_s2600cp_p4000cp_tps_rev19.pdf Technical Product Specification, on page 109 (System Status LED).The first question will be if you able to enter your Operating System.Please open the cover and verify if any other amber light shows on the system board. Especially on page 107, for the LED on the back part of the system board. Also, any other sections of the board.Also, could you please help me with some information on the BIOS main screen:

• Platform ID:
• BIOS Version:

If BIOS version is below https://downloadcenter.intel.com/download/26957/Intel-Server-Board-S2600CP-Firmware-Update-Package-for-EFI?product=56334 02.06.0006, please download and update the board to the latest version. If there is anything else we can help please feel free to ask.Best regards, Henry A.

[idata]

Hello Stepans,

I just will like to follow up the information sent, to see if it helped.And also you could send me the following information from the BIOS main screen:

• Platform ID:
• BIOS Version:

If there is anything else we can help please feel free to ask.Best regards, Henry A.

[idata]

Hello Stepans,

I just will like to follow up the information sent, to see if it helped.And also you could send me the following information from the BIOS main screen:

• Platform ID:
• BIOS Version:

If there is anything else we can help please feel free to ask.Best regards, Henry A.

[idata]

Hello Stepans,

I just will like to follow up the information sent, and I am afraid because we did not received any information back we are going to proceed on closing the case. If there is anything else we can help please feel free to ask.Best regards, Henry A.