How to rebuild raid-configuration entry on hdd

[idata]

Hello everyone,

because of a failed windows-boot one of my raid0-hdds is not properly dedected, but marked as "non-raid" hdd instead.

I guess some of the raid-configuration on the hdds boot-sector was lost (I don't know about the specific techniques intels onchip-raid use though).

My question is how to rebuild the raid-entries on the hdd, if that's possible.

Here is a screenshot from the "intel Matrix Storage Console":

The controller is ICH8R, ICH9R or ICH10R raid-controller, I have access to linux to solve this problem if necessary.

Best regards,

Michael Sieberer

[Daniel_O_Intel]

The screenshot didn't come through. Which motherboard is this on?

[idata]

It's an ASUS P6T WS Professional, I'll look for the screenshot.

//EDIT:

I managed to do it. As both HDDs were identical, just copying the first HDDs RAID-Metadata to the failed one did the job.

Thank you anyway

Michael Sieberer

[Daniel_O_Intel]

Nice!