I can't find DFX configuration in BIOS

[kevin_gao]

My platform is Birch Stream AP for Avenue City. In order to do the PCIe IOMT testing, I need to enable EV DFX feature. However, I cannot find DFX feature based on the following configuration flow. There is no DFX feature at all in IIO configuration.

EDKII Menu -> Socket Configuration -> IIO Configuration -> DFX Global Configuration -> EV DFX Features: Enable

[Sreelakshmi1]

Hello kevin_gao,

Greetings for the day!

Thank you for posting in Intel community forum.

Please note that the Birch stream (Granite Rapids) has not been launched yet.

Also, we do not have information about "Intel Avenue City Birch Stream AP," as it is not an official Intel server board.

We recommend you refer to the Resource and Documentation Center and look for more documentation about Granite Rapids. Please refer to the below link to access the Resource and Documentation Center:

https://www.intel.com/content/www/us/en/support/articles/000058073/programs/resource-and-documentation-center.html

Also, you can open a new case in Intel Premier Support for this type of validation pre-launch. Please refer to the below link to access Intel Premier Support.

https://www.intel.com/content/www/us/en/support/articles/000057045/ethernet-products.html

Regards,

Sreelakshmi B.

[Sreelakshmi1]

Hello kevin_gao,

Greetings for the day!

We are following up to find out if you were able to find the information we provided. Please reply to confirm, so we can continue helping on a resolution. Looking forward to receiving your reply.

Regards,

Sreelakshmi B

[kevin_gao]

Hi Sreelakshmi,

I'm not able to find out the solution for this issue. Please help.

Best Regards,

Kevin

[Sreelakshmi1]

Hello kevin_gao,

Greetings for the day!

I hope this message finds you well.

We wanted to bring to your attention that the Birch stream (Granite Rapids) has not been officially launched at this time. Additionally,we would like to clarify that we do not possess information on the "Intel Avenue City Birch Stream AP" as it does not correspond to an official Intel server board.

For a more detailed and accurate response to your inquiry, we recommend opening a new case in Intel Premier Support for this type of validation pre-launch. Kindly follow the below link to register and gain access to Intel Premier Support.

https://www.intel.com/content/www/us/en/support/articles/000057045/ethernet-products.html

After your account is approved, you will find the IPS button on your Intel dashboard in the My Support section which helps you to create an IPS case.

Regards,

Sreelakshmi B.

[Sreelakshmi1]

Hello kevin_gao,

Greetings for the day!

I hope this message finds you well.

We are following up to find out if you were able to find the information we provided. Please reply to confirm, so we can continue helping on a resolution. Looking forward to receiving your reply.

Regards,

Sreelakshmi B

[kevin_gao]

Hi Sreelakshmi,

I followed your instructions to apply the premier support, however, it has been a week and there is no update. Do you know who can help in Intel to expedite the approval process?

Thanks,

Kevin

[Sreelakshmi1]

Hello kevin_gao,

Greetings for the day!

I hope this message finds you well.

Thank you for the update. We would like to inform you that the account request will need to be validated and is subject to approval by the dedicated team. 

An e-mail notification will be sent to you if the account has been approved. Therefore, the Intel Premier Support button will be visible in the My Intel Dashboard under the My Support section.

We request your patience during this time.

Regards,

Sreelakshmi B

[Sreelakshmi1]

Hello kevin_gao,

Greetings for the day!

I hope this message finds you well.

We are following up to find out if you were able to find the information we provided. Please reply to confirm, so we can continue helping on a resolution. Looking forward to receiving your reply.

Regards,

Sreelakshmi B

[Sreelakshmi1]

Hello kevin_gao,

I hope this message finds you well.

We have been awaiting your response regarding the query and unfortunately, we have not received any communication from you.

We regrettably need to close the request, if you still require assistance or have additional questions, Please don't hesitate to ask any further questions in the future. Feel free to start a new conversation, as this thread will no longer be monitored.

We appreciate your understanding and value your business. Should you need assistance in the future, please don't hesitate to reach out.

Regards,

Sreelakshmi B