Intel® 82801IR I/O Controller Supported RST Version with Windows Server 2016

[SAtam]

Hi,

I made the mistake in installing most recent RST on an older Intel S3200SHV Server board with Intel® 82801IR I/O Controller, evidently all hell broke loose as i got spinning dots at reboot. In order to address the issue I set the controller to IDE after unplugging one of the drives. I did some research and apparently version 10.8.0.1003 is the latest one that would work with this legacy controller, can anyone please confirm this and if so, how can i go back to my RAID setup if the server no longer boots when set to RAID (Latest RST has already been uninstalled).

Your suggestions are greatly appreciated

[idata]

Hello Sarven,

According to https://ark.intel.com/products/31894/Intel-82801IR-IO-Controller https://ark.intel.com/products/31894/Intel-82801IR-IO-Controller is currently a Retired and discontinued product. Support is provided by the ‎Intel® Communities users on the ‎Intel® website.

Could you please provide us with the specific version of RSTe you have currently installed and which was the version you had previously installed?

Here is a link to the available downloads for this board:

https://downloadcenter.intel.com/product/46534/Intel-Server-Board-S3200SHV Downloads for Intel® Server Board S3200SHVIf you have any more questions, please let me know.

Intel always recommends using validated hardware/software configuration to avoid unforeseen issues.

Best regards,

Caesar B_Intel.

[idata]

Hello Sarven,

We would like to know if there is anything else we could be of assistance.

If you have any more questions, please let us know.Sincerely,Caesar B_Intel.

[idata]

Hello Sarven,

If there is anything else we could be of assistance please do not hesitate to let us know.

Best regards,

Caesar B_Intel.