Hi Guys,
I made a mistake and cleared all my configurations on my RAID controller, is it possible to recover the configurations (RAID Groups) and the data that was on them?
Cheers,
Link Copied
Hi!
Although clearing a RAID configuration may cause data corruption (see screenshot below), if you have not yet initialized the volume(s) and saved the changes within the RAID console, we could try some troubleshooting steps. These would depend on which RAID solution you used to configure your RAID level(s) and how your drives were RAIDed. Please, provide more details as to how your system is set up, especially RAID-wise.
http://download.intel.com/support/motherboards/server/sb/d29305023_raid_swug_r23_5.pdf
Hi!
Although clearing a RAID configuration may cause data corruption (see screenshot below), if you have not yet initialized the volume(s) and saved the changes within the RAID console, we could try some troubleshooting steps. These would depend on which RAID solution you used to configure your RAID level(s) and how your drives were RAIDed. Please, provide more details as to how your system is set up, especially RAID-wise.
http://download.intel.com/support/motherboards/server/sb/d29305023_raid_swug_r23_5.pdf
HKSMonaro
I would recommend contacting http://www.intel.com/p/en_US/support/contactsupport Intel Customer Support for proper walk through of this process of recreating your RAID configuration.
For more complete information about compiler optimizations, see our Optimization Notice.