Intel S1200SPL Boot Problem

[PhilSaunter]

Hey Everyone,

I just got an Intel S1200SPL Server board. Unfortunately I can't get it to work.

I installed an Intel E3 1220v5 along side 4 GB of Samsung ECC DDR4 2400T DIMM  R1x16 RAM (in B2).

The diagnostic LED's show a pattern not described in the manual. 

System status LED slowly blinking amber.

Diagnostic LEDs 2-3 and 6-7 are on.

The system draws 28W from the wall (with 2 normal FANs installed - they work).

VGA and Displayport out have no output. 

I don't have other RAM here (except for Non-ECC, that didn't work).

Maybe some of you have an idea. I am unfortunately still new to server hardware.

Thank you in advance.

[Steven_Intel]

Hello PhilSaunter,

Thank you for posting on the Intel️® communities.   

Due to this product being discontinued, Intel Customer Service no longer supports inquiries for it, but perhaps fellow community members have the knowledge to jump in and help. 

You may also find the Discontinued Products website (https://www.intel.com/content/www/us/en/support/discontinued-products.html) website helpful to address your request.  

You can get the specifications and verify this product's discontinuance status at the Intel® Product Specifications website > Product Status > "Discontinued". 

Please keep in mind that this thread will no longer be monitored by Intel. Thank you for your understanding.  

Best regards,

Steven G.

Intel Customer Support Technician.