RAID 1 COM HDS E SSD

[dferr5]

Estou tendo problemas ao configurar RAID 1 (discos magnéticos) com adição de um SSD (sem que este faça parte do raid). Terá uma outra função dentro do SO.

O SSD é reconhecido na BIOS, no entanto, quando o SO (Win2008R2) sobe o SSD não fica disponível para configuração.

Preciso de ajuda para solucionar este problema.

Minha placa é uma S3420GLP

[idata]

Hello Demetrio,

Can you please let us know what RAID solution you are using?If you are using the ESRT2, you will need to configure the single drive as a single RAID 0 drive.You can find additional information https://www.intel.com/content/www/us/en/support/articles/000007554/server-products.html here.Once it is created you would need to make sure to partition the drive and assign a letter. If you are using the RST, which should be plug-in-play, you just need to make sure the drive is formattedBest regards,Sergio S.

[idata]

Hello Demetro,

I am following up your question, please let us know if you need further assistance.Best regards,Sergio S.

[dferr5]

Morning,

I will follow yours orientations and will post here the results. Ok?

[idata]

Hello Demetrio,

No problem, we will look forward to your response.Best regards,Sergio S.

[idata]

Hello Demetrio,

We are following up your case, in case you need further assistance please contact us backBest regards,Sergio S.