Server Products
Data Center Products including boards, integrated systems, Intel® Xeon® Processors, RAID Storage, and Intel® Xeon® Processors
4778 Discussions

RAID Controller Connection

idata
Employee
1,760 Views

I am using an RS2BL080 RAID controller in an SR2600UR server system. My question is, should I be using an HBA cable to connect the controller to the server midplane? I have several servers with this configuration, but only recently started using the HBA cable. I have new server, with the HBA cable connected, and it rebooted and generated this error:

Controller ID: 0 Sensor bad on enclosure: 1

Sensor 5

Event ID:184

Is the HBA cable necessary and could it have contributed to the error? Any help is appreciated.

0 Kudos
1 Solution
idata
Employee
319 Views

diamondcomics,

Does the http://www.intel.com/support/motherboards/server/sb/CS-025358.htm Rack-optimized systems backplane and RAID Controller cabling guide help?

Regards,

John

View solution in original post

0 Kudos
2 Replies
idata
Employee
320 Views

diamondcomics,

Does the http://www.intel.com/support/motherboards/server/sb/CS-025358.htm Rack-optimized systems backplane and RAID Controller cabling guide help?

Regards,

John

0 Kudos
idata
Employee
319 Views

That is perfect. Thanks!

0 Kudos
Reply