Solved: RMS25CB040 and VMware ESXi 5.1.0 (Free VMware vSphere Hypervisor)

Agold2 · ‎10-02-2015

I have ACTINA server with Intel mainboard and RAID SATA controller RMS25CB040, and I have free product VMware vSphere Hypervisor (ESXi 5.1.0) installed on this server.

I have RMM Web Console also.

Is there any software/driver/module for free ESXi to check status of RAID array ?

I found this

https://downloadcenter.intel.com/download/22062/RAID-management-utility-for-VMWare-ESXi-5 https://downloadcenter.intel.com/download/22062/RAID-management-utility-for-VMWare-ESXi-5

but I don't have any command line console with my free ESXi.

idata · ‎10-05-2015

Hello,

To answer your question, the solution we offer for RAID monitoring when using ESXi is the Intel(R) RAID Web Console 2. We recommend checking the following article for further information on implementing the application:

http://www.intel.com/support/motherboards/server/sb/CS-033313.htm Server Products — VMware* ESXi 5.0 Installation and Intel® RAID Web Console 2 Tips and Tricks

View solution in original post

idata · ‎10-05-2015

Hello,

To answer your question, the solution we offer for RAID monitoring when using ESXi is the Intel(R) RAID Web Console 2. We recommend checking the following article for further information on implementing the application:

http://www.intel.com/support/motherboards/server/sb/CS-033313.htm Server Products — VMware* ESXi 5.0 Installation and Intel® RAID Web Console 2 Tips and Tricks