S1200BTLR with E3-1230V2 do not display anything

[idata]

hello,

Last week I bought a new S1200BTLR motherboard and use a Xeon E3-1230V2 with it.

When I switch it on, after 5-6 seconds the status led blink orange and diag led show 0111-0000, then it stay like that without anything on screen.

Motherboard PBA is E98681-352 and should be compatible with the E3-1230v2

When i remove DIMM from the MB i get me some beeps.

I try the CPU on other MB and it work fine.

need some help

thanks in advance.

[Edward_Z_Intel]

What kind of memory are you using?

[idata]

hello Edward

I'm using a Corsair DDR3 Memory kit : CMP16GX3M4A1333C9

http://www.corsair.com/dominator-with-dhx-pro-connector-and-airflow-2-fan-16gb-triple-channel-ddr3-memory-kit-cmp16gx3m4a1333c9.html http://www.corsair.com/dominator-with-dhx-pro-connector-and-airflow-2-fan-16gb-triple-channel-ddr3-memory-kit-cmp16gx3m4a1333c9.html

[Edward_Z_Intel]

Seems it's non-ECC DIMM. The board requires ECC DIMMs. See the http://www.intel.com/support/motherboards/server/sb/CS-032418.htm Tested memory and hardware list for supported DIMMs. But ignore the Registered DIMMs in the list - the board supports unbuffered DIMMs only.

[idata]

ok thanks,

I will check with others DIMMs modules

[idata]

Hi Edward

I get some new ECC DIMMs and it work fine

thanks a lot