Server Products
Data Center Products including boards, integrated systems, Intel® Xeon® Processors, RAID Storage, and Intel® Xeon® Processors
Announcements
All support for Intel NUC 7 - 13 systems has transitioned to ASUS. Read latest update.
4728 Discussions

S1200V3RPS ESRT2 Raid10 multiple hard disk failure.

JDann
Beginner
2,076 Views

A have three different S1200V3RPS servers configured with ESRT2 Raid10 (sata).

 

Now and then out of the blue too or three disks fail at the same time resulting in corrupt data.

 

You don't get any warning's, it just happens.

 

 

We have the latest bios firmware and ESRT2 drivers.

 

We have several servers with the older S1200BTL with the same raid setup and the work just fine.

0 Kudos
1 Solution
idata
Employee
439 Views

Hello,

We strongly recommend contacting our support directly in order to check the server system logs and narrow the issue based on that report:

http://www.intel.com/p/en_US/support/contactsupport http://www.intel.com/p/en_US/support/contactsupport

View solution in original post

0 Kudos
4 Replies
AP16
Valued Contributor III
439 Views

What HDDs used (model)?

0 Kudos
JDann
Beginner
439 Views

Hi

Four Western Digital WD5003ABYZ - SATA3 WD RE4 500MB

0 Kudos
AP16
Valued Contributor III
439 Views

The drives are online, you can get a SMART data from them in console?

0 Kudos
idata
Employee
440 Views

Hello,

We strongly recommend contacting our support directly in order to check the server system logs and narrow the issue based on that report:

http://www.intel.com/p/en_US/support/contactsupport http://www.intel.com/p/en_US/support/contactsupport

0 Kudos
Reply