Server Products
Data Center Products including boards, integrated systems, Intel® Xeon® Processors, RAID Storage, and Intel® Xeon® Processors
4761 Discussions

S1400FP4 How update bios support E5-2400 V2 CPU

idata
Employee
2,092 Views

S1400FP4 How update bios support E5-2400 V2 CPU@

System windows 10 or windows server 2012

0 Kudos
1 Solution
idata
Employee
627 Views

Hello myloveqiang,

 

 

"How to upgrade the BIOS on a S1400FP4".

 

You can download the latest BIOS from:

 

https://downloadcenter.intel.com/download/26964/Intel-Server-Board-S1400FP-Firmware-Update-Package-for-EFI?product=66137 https://downloadcenter.intel.com/download/26964/Intel-Server-Board-S1400FP-Firmware-Update-Package-for-EFI?product=66137

 

 

Also, read the "Read Me.txt" file.

 

 

But also here are the steps:

 

- Unzip the contents of the update package and copy all files to a folder on a USB flash drive

 

- Insert the USB flash drive to any available USB port on the server system to be updated

 

- Boot the Server to the EFI shell. This can be accessed via the BIOS setup utility during POST.

 

- Run the command "map -r" in the EFI shell to mount the USB flash drive

 

- Run the command "fs0:" to change folders to the USB flash drive. The USB flash drive

 

may also mount to fs1: depending on other installed devices. The number of "fs# " is

 

dependent on the result of command "map -r"

 

- Change folders to the folder storing the update package files

 

- Run the command "Startup.nsh" to start updating all the firmware and BIOS updates

 

 

Warning:

 

!!Do NOT reboot or remove power from your system during the update process.

 

Doing so may render your system inoperable. !!

 

 

----- Verifying updates

 

- Reboot the system

 

- During POST, hit the Key when prompted to access the BIOS Setup Utility

 

- Hit the F9 key to load BIOS Defaults

 

- At the MAIN menu verify the BIOS revision is correct

 

- Move cursor to the SERVER MANAGEMENT Menu

 

- Move cursor down to the SYSTEM INFORMATION Option and hit Enter

 

- Verify the BMC Firmware revision is correct

 

- Verify the SDR revision is correct

 

- Verify the ME Firmware revision is correct

 

- Hit the F10 Key to save changes and Exit

 

 

If there is anything else we can help please feel free to ask.

 

 

Best regards,

 

 

Henry A.

View solution in original post

0 Kudos
3 Replies
idata
Employee
628 Views

Hello myloveqiang,

 

 

"How to upgrade the BIOS on a S1400FP4".

 

You can download the latest BIOS from:

 

https://downloadcenter.intel.com/download/26964/Intel-Server-Board-S1400FP-Firmware-Update-Package-for-EFI?product=66137 https://downloadcenter.intel.com/download/26964/Intel-Server-Board-S1400FP-Firmware-Update-Package-for-EFI?product=66137

 

 

Also, read the "Read Me.txt" file.

 

 

But also here are the steps:

 

- Unzip the contents of the update package and copy all files to a folder on a USB flash drive

 

- Insert the USB flash drive to any available USB port on the server system to be updated

 

- Boot the Server to the EFI shell. This can be accessed via the BIOS setup utility during POST.

 

- Run the command "map -r" in the EFI shell to mount the USB flash drive

 

- Run the command "fs0:" to change folders to the USB flash drive. The USB flash drive

 

may also mount to fs1: depending on other installed devices. The number of "fs# " is

 

dependent on the result of command "map -r"

 

- Change folders to the folder storing the update package files

 

- Run the command "Startup.nsh" to start updating all the firmware and BIOS updates

 

 

Warning:

 

!!Do NOT reboot or remove power from your system during the update process.

 

Doing so may render your system inoperable. !!

 

 

----- Verifying updates

 

- Reboot the system

 

- During POST, hit the Key when prompted to access the BIOS Setup Utility

 

- Hit the F9 key to load BIOS Defaults

 

- At the MAIN menu verify the BIOS revision is correct

 

- Move cursor to the SERVER MANAGEMENT Menu

 

- Move cursor down to the SYSTEM INFORMATION Option and hit Enter

 

- Verify the BMC Firmware revision is correct

 

- Verify the SDR revision is correct

 

- Verify the ME Firmware revision is correct

 

- Hit the F10 Key to save changes and Exit

 

 

If there is anything else we can help please feel free to ask.

 

 

Best regards,

 

 

Henry A.
0 Kudos
idata
Employee
627 Views
0 Kudos
idata
Employee
627 Views

Hello myloveqiang,

 

 

I am glad the information provided helped. If there isn't anything I can help I will proceed on closing the forum.

 

 

Best regards,

 

 

Henry A.
0 Kudos
Reply