Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Beginner
981 Views

S2600CP4 with P4308XXMFEN: FANs ride full speed!!!

Installed latest BIOS, FRU, SDR & so on. Tried to change in BIOS - acousting section - no changes. Looked in sysinfo utility's log file - many strings about redundancy fan failure. But I have in this case only permanent fans with 4 wires instead of 6pinout. A part of log here:

System Information Retrieval Utility Version 12.0 Build 10

Copyright (c) 2013 Intel Corporation

-------------------------------------------

Platform Firmware Inventory

-------------------------------------------

BIOS Version....... SE5C600.86B.02.01.0002

BMC Firmware Version:

Op Code....... 1.19.5018

Boot Code.............. 01.17

ME Firmware Version:

Boot Code: 02.01.07.231

SDR Version:

SDR version: SDR Package 1.10

-------------------------------------------

Sensors

-------------------------------------------

LUN NAME NUMBER OWNER UNITS VALUE

------------------------------------------------------------------------------------------------------

0 Fan Redundancy 12 32 REDUNDANCY_LOST, NON_REDUNDANT_INSUFFICENT_RESOURCES

0 SSB Therm Trip 13 32 STATE_DEASSERTED

0 BMC FW Health 16 32 UNKNOWN

0 System Airflow 17 32 CFM 150.000000

0 BB EDGE Temp 32 32 Degrees Celsius 25.000000

0 Front Panel Temp 33 32 Degrees Celsius 26.000000

0 SSB Temp 34 32 Degrees Celsius 43.000000

0 BB BMC Temp 35 32 Degrees Celsius 34.000000

0 BB P2 VR Temp 36 32 Degrees Celsius 36.000000

0 BB MEM VR Temp 37 32 Degrees Celsius 29.000000

0 Pwr Unit Status 1 32 ALL_DEASSERTED

0 LAN NIC Temp 47 32 Degrees Celsius 41.000000

0 System Fan 1 48 32 RPM READING_UNAVAILABLE

0 System Fan 2 49 32 RPM READING_UNAVAILABLE

0 System Fan 3 50 32 RPM READING_UNAVAILABLE

0 System Fan 4 51 32 RPM READING_UNAVAILABLE

0 System Fan 5 52 32 RPM READING_UNAVAILABLE

0 Fan 1 Present 64 32 DEVICE_REMOVED/DEVICE_ABSENT

0 Fan 2 Present 65 32 DEVICE_REMOVED/DEVICE_ABSENT

0 Fan 3 Present 66 32 DEVICE_REMOVED/DEVICE_ABSENT

0 Fan 4 Present 67 32 DEVICE_REMOVED/DEVICE_ABSENT

0 IPMI Watchdog 3 32 OK

0 Fan 5 Present 68 32 DEVICE_REMOVED/DEVICE_ABSENT

0 P1 Status 112 32 PROCESSOR_PRESENCE_DETECTED

0 P2 Status 113 32 PROCESSOR_PRESENCE_DETECTED

0 P1 Therm Margin 116 32 Degrees Celsius -48.000000

0 P2 Therm Margin 117 32 Degrees Celsius -48.000000

0 P1 Therm Ctrl % 120 32 % 0.000000

0 P2 Therm Ctrl % 121 32 % 0.000000

0 P1 ERR2 124 32 STATE_DEASSERTED

0 P2 ERR2 125 32 STATE_DEASSERTED

0 CATERR 128 32 STATE_DEASSERTED

0 Physical Scrty 4 32 GENERAL_CHASSIS_INTRUSION

0 P1 MSID Mismatch 129 32 STATE_DEASSERTED

0 CPU Missing 130 32 STATE_DEASSERTED

0 P1 DTS Therm Mgn 131 32 Degrees Celsius -49.000000

0 P2 DTS Therm Mgn 132 32 Degrees Celsius -48.000000

0 P2 MSID Mismatch 135 32 STATE_DEASSERTED

0 P1 VRD Hot 144 32 LIMIT_NOT_EXCEEDED

0 P2 VRD Hot 145 32 LIMIT_NOT_EXCEEDED

0 P1 MEM01 VRD Hot 148 32 LIMIT_NOT_EXCEEDED

0 P1 MEM23 VRD Hot 149 32 LIMIT_NOT_EXCEEDED

0 P2 MEM01 VRD Hot 150 32 LIMIT_NOT_EXCEEDED

0 FP NMI Diag Int 5 32 OK

0 P2 MEM23 VRD Hot 151 32 LIMIT_NOT_EXCEEDED

0 DIMM Thrm Mrgn 1 176 32 Degrees Celsius -58.000000

0 DIMM Thrm Mrgn 2 177 32 Degrees Celsius READING_UNAVAILABLE

0 DIMM Thrm Mrgn 3 178 32 Degrees Celsius -59.000000

0 DIMM Thrm Mrgn 4 179 32 Degrees Celsius READING_UNAVAILABLE

0 Mem P1 Thrm Trip 192 32 OK

0 Mem P2 Thrm Trip 193 32 OK

0 Agg Thrm Mgn 1 200 32 Degrees Celsius -24.000000

0 Agg Thrm Mgn 2 201 32 Degrees Celsius -24.000000

0 Agg Thrm Mgn 3 202 32 Degrees Celsius -23.000000

0 SMI Timeout 6 32 STATE_DEASSERTED

0 Agg Thrm Mgn 4 203 32 Degrees Celsius -23.000000

0 Agg Thrm Mgn 5 204 32 Degrees Celsius -24.000000

0 BB +12.0V 208 32 Volts 11.883000

0 BB +5.0V 209 32 Volts 4.937100

0 BB +3.3V 210 32 Volts 3.282000

0 BB +5.0V STBY 211 32 Volts 4.980500

0 BB +3.3V AUX 212 32 Volts 3.282000

0 BB +1.05V P1Vccp 214 32 Volts 0.911700

0 BB +1.05V P2Vccp 215 32 Volts 0.887700

0 BB +1.5 P1DDR AB 216 32 Volts 1.495400

0 System Event Log 7 32 UNKNOWN

0 BB +1.5 P1DDR CD 217 32 Volts 1.509000

0 BB +1.5 P2DDR AB 218 32 Volts 1.509000

0 BB +1.5 P2DDR CD 219 32 Volts 1.502200

0 BB +1.8V AUX 220 32 Volts 1.793600

0 BB +1.1V STBY 221 32 Volts 1.076230

0 BB VBAT 222 32 Volts 3.055900

0 BB +1.35 P1LV AB 228 32 Volts READING_UNAVAILABLE

0 BB +1.35 P1LV CD 229 32 Volts READING_UNAVAILABLE

0 BB +1.35 P2LV AB 230 32 Volts READING_UNAVAILABLE

0 BB +1.35 P2LV CD 231 32 Volts READING_UNAVAILABLE

0 System Event 8 32 UNKNOWN

96 NM Capabilities 26 44

96 P1 MTT 52 44 %

96 P2 MTT 53 44 %

0 Button 9 32 UNKNOWN

0 VR Watchdog 11 32 STATE_DEASSERTED

0 Kudos
1 Reply
Highlighted
Employee
23 Views

Seems the BMC can't get any fan readings. Which fan connectors are you using?

Your chassis has two fixed fans, and they should go to Sys Fan 1 and Sys Fan 2.

0 Kudos