After a change of a LSI 9266-8i Controller with same one, my motherboard doesn't work any more,
Have System Status LED solid amber light & ID LED solid blue light!
I cannot turn off the ID LED, I cannot power on the system, I tried to clear cmos, last night I live the Server without Power, . . . . System_LED
What does it mean?
For the amber System Status Light I found:
Fatal alarm – system has failed or shut down
– CPU Missing
– Thermal Trip asserted
– Non-recoverable temperature threshold asserted
– Non-recoverable voltage threshold asserted
– Power fault/Power Control Failure
– Fan redundancy lost, insufficient system cooling. This
does not apply to non-redundant systems.
– Power supply redundancy lost insufficient system power.
This does not apply to non-redundant systems.
Note: This state also occurs when AC power is first applied to
the system. This indicates the BMC is booting.
Tried with other 100% working cpu,s
Tried the motherboard in a SC5650BRP Case, the same problem, solid System Status LED (amber) and solid ID LED (blue)
All fan's ok
All powersupplies are ok
2x Xeon L5630
Case SC5600BRP (2x750W)
Kingston RAM 6x8 GB 1333
What can I try? Or is this motherboard fault ???
Sorry for my bad english !
thanks & regards
Remove the add-in controller and try to boot the server with minimal configuration (one CPU, one DIMM). If the server can boot, add the components one at a time. If it doesn't boot, check the POST Code LEDs on the back of the board. See Appendix E of the board http://www.intel.com/support/motherboards/server/s5520hc/sb/CS-030223.htm Technical product specification for more details about POST Code LEDs.
Thanks for your answer.
I tired also with Minimum configuration,
I tried without any Controller Card, only the Board, changed CPUs, changed RAM anf the CASE with Power Supplies,., nothing helps.
All other components work, have here more S5520HC/SC Servers.
I cannot Check the Post Code LEDs, the System doesn't power on.
Have only System Status LED solid amber light & ID LED solid blue light!
Motherboard will be exchanged (warranty)