Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Beginner
1,139 Views

SAS IOC Temp has failed and may not be providing a valid reading

Jump to solution

Hello,

Just took delivery of a new Intel server, installed the SEL software to monitor events, and had several events that are a bit of a concern.

Board is a S2600CW (version H67035-224), 32GB RAM, 8HDDs.

The error that consistently pops up is as described above - "SAS IOC Temp has failed and may not be providing a valid reading" and "Management Subsystem Health, BMC FW Health (# 0x10)."

Is this actually a hardware failure? Was something misconfigured by the system builder?

Any help would be greatly appreciated.

Regards,

Bill

0 Kudos

Accepted Solutions
Highlighted
Community Manager

Re: SAS IOC Temp has failed and may not be providing a valid reading

Jump to solution

Hello Bill,

 

 

To answer your question, this is not a hardware failure but a reading issue. Our recommendation is downloading and installing the latest firmware for the server board which can be found here:

 

 

https://downloadcenter.intel.com/download/26366/Intel-Server-Board-S2600CW-Firmware-Update-Package-f... Intel® Server Board S2600CW Firmware Update Package for EFI

View solution in original post

0 Kudos
1 Reply
Highlighted
Community Manager
1 View

Re: SAS IOC Temp has failed and may not be providing a valid reading

Jump to solution

Hello Bill,

 

 

To answer your question, this is not a hardware failure but a reading issue. Our recommendation is downloading and installing the latest firmware for the server board which can be found here:

 

 

https://downloadcenter.intel.com/download/26366/Intel-Server-Board-S2600CW-Firmware-Update-Package-f... Intel® Server Board S2600CW Firmware Update Package for EFI

View solution in original post

0 Kudos