- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello, first of all sorry for my english, I'm from Sapin. We have a SR2500ALLX server with redundant fans module. The problem is that large fans (all 4 of the CPU) have an orange LED stays on and rotating at high speed, make a lot noise. We bought a new fan module, thinking that the other failed, but the problem persists. I have checked the connections and fans are fine, just have a cord that is connected to the motherboard, I have not found any option in BIOS to reduce fan speed. Any solution?
Link Copied
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
This is the fan module that we changed:
SR2500BRP to LX Fan Upgrade Kit (SR2500ALLX Only)ASRLXFANS
http://sklep.kg.net.pl/produkt/24874/zestaw-wentylatorow-intel-sr2500-brplx-fan-6x-hotswap http://sklep.kg.net.pl/produkt/24874/zestaw-wentylatorow-intel-sr2500-brplx-fan-6x-hotswap
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Did you apply latest http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=19587 BIOS/Firmware after replacing fans?
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
I updated the BIOS but the problem persists. Now the BIOS displays the following error:
Error code: 8110
Instance: 1
I reconnected all the board components and the problem persists. I just have to try to reconnect or remove processors. On the right side of the BIOS menu showing the error, says that the instance number indicates the device fails. Any ideas? Thank you!
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
I updated the BIOS but the problem persists. Now the BIOS displays the following error:
Error code: 8110
Instance: 1
I reconnected all the board components and the problem persists. I just have to try to reconnect or remove processors. On the right side of the BIOS menu showing the error, says that the instance number indicates the device fails. Any ideas? Thank you!
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Can you run http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=17933 SEL Viewer to check what's causing the issue?
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Solved updating the FRU with a bootable pendrive. Thanks!
- Subscribe to RSS Feed
- Mark Topic as New
- Mark Topic as Read
- Float this Topic for Current User
- Bookmark
- Subscribe
- Printer Friendly Page