I have a R1208WFTYS system. When I try to open RMM web interface via http:// protocol, it redirects to https://. So I disabled "https" in security settings in web interface. After that I cannot connect neither https nor http.
I can access BMC via ipmitool - this is the only thing that works.
Is there any way to re-enable https (as it seems to be the root cause of my troubles) or reset RMM setting to defaults remotely? Maybe there is some magic ipmitool raw ... command to do that?
We can try resetting the BMC in the BIOS but this can restart the IP configuration in the BMC LAN options so, let me try here first if we can restart the defaults and then set the IP settings before the restart so you will not lose the connection.
I will let you know as soon as I test it.
I had arranged a bootable disk with OS plugged into my server so I successully reset RMM settings with syscfg utility. So the urgency is gone.
Anyway, I would appreciate if you would provide instructions on how to reset RMM settings:
1) remotely via ipmitool
2) via BIOS settings screen
We are glad to hear that the urgency is gone.
We were trying to find out a way to reset it remotely as you told us that you were not able to do it on site, but, I am not sure if it is possible without using syscfg.
Please let me do the consult and I will contact you back.
That normally happens when you disable the option but we can take the feedback as well.
Please let us know if you have further questions.
Please, forgive my persistence. You say that "http" access is disabled when I disable "https" in security settings? There are two separate checkboxes for "http" and "https", so that kind of behavior is at least strange and counter-intuitive.
Yes, we did the lab and we saw that behavior, we understand your concern, and we will take your feedback in order to watch it deeply.