some questions about SROMBSASMP2 Bios raid console

[-Alex-]

Okay!

Greetings everyone, and welcome to another stupid question from me - can it possibly on SROMBSASMP2 to make a non-RAID physical drives shows as they are (not in RAID - non-RAID drives, like simple SATA drives)?

All what i stuck, that only span arrays can possibly to create RAID0 or RAID1 with 2 drives.

Am i right? This SAS controller can't operate simply drives in backplane?

Can it can be understand phys drives like they ones (firmwared) to non-RAID option?

Hope some will answer to me.

It possibly to can work  with HBA? (HBA mode: (Host Bus Adapter) mode, the controller will not work in RAID mode, so that the operating system can see each disks individually.)

[Paul_R_Intel]

Hello, -Alex-.  

Thank you for joining the community  

Integrated Intel(R) RAID Controller SROMBSASMP2 and the associated spare parts and accessories have been discontinued. This info is also to inform you that support for the said products has been switched to self-service support.  

The available self-service support options include:  

Technical support content available online.  

Warranty service through the Warranty Center.  

Support and services for members of the Intel Channel Program through the Intel® Reseller Center.  

You can find the product information and support status at the following link:  

• https://www.intel.com/content/www/us/en/support/products/52368/server-products/sasraid/intel-integrated-raid-modulessystem-boards/intel-integrated-raid-module-srombsasmr.html

Intel Customer Service Agents no longer respond to telephone, chat, community support forum, or email inquiries for self-service products. We will proceed to mark this thread as closed, other members may still provide further help, thank you for choosing Intel.  

Regards,  

Paul R.   

Intel Customer Support Technician   

For firmware updates and troubleshooting tips, visit:   

https://intel.com/support/serverbios   

[-Alex-]

ok, i know it not support anymore.

Can anyone answer simple question - SROMBSASMP2 (LSI 1078) can be flash to IT-mode from IR mode? Can it possibly? In oficial guide https://www.intel.com/content/dam/support/us/en/documents/motherboards/server/sb/s5520ursasir2k3_sts_report_rev10.pdf

this controller have LSI 1078 compatible.

Ok. Anyone have LSI 1078-compatible firmwares to flash this SROMBSASMP2 to IT-mode?