cancel
Showing results for 
Search instead for 
Did you mean: 

SSD X-25-M 80GB

idata
Esteemed Contributor III
Hello, do i have trim properly working?I installed this one today, it already come with latest firmware, so what i done:

1. Set Bios to AHCI2. Clean Windows 7 install

Once i got in desktop, i saw that it was listed under "Safely hardware remove", why?

I tryed installing latest chipset inf, but it was still showing there.

Then i download intel rapid storage technology and finally it is not there anymore.

What worries me, if by having this installed, will trim work? i read that it will not for raid setups, but with only one SSD, what?

My Motherboard is P5W DH Deluxe

8 REPLIES 8

idata
Esteemed Contributor III

The IRST driver does not support RAID but is fine for non-RAID usage with Windows 7 and should run TRIM automatically.

idata
Esteemed Contributor III

Ok, about "safety hardware remove", what does irst drivers do, that it is no longer shown there?

idata
Esteemed Contributor III

I have the IRST driver and don't see the "safety hardware remove" and that's fine, not a problem for me. I connected a USB Flash Drive yesterday and removed without any problems. My advice is don't worry about it.

idata
Esteemed Contributor III

Current benchmark

Average, good or bad?