cancel
Showing results for 
Search instead for 
Did you mean: 

1.7 update

idata
Esteemed Contributor III

My system is running fine is there a need to upgrade to the lastest firmware?

12 REPLIES 12

idata
Esteemed Contributor III

From the release notes:

"This firmware revision fixes enumeration and slow-boot issues on SATA 6Gb/s controllers, adds improvements to S.M.A.R.T. attributes for more accurate reporting of drive health, improves NCQ capability, and fixes possible drive hangs when reading S.M.A.R.T. self-test log".

idata
Esteemed Contributor III

Hey thanks redux I had already read that so I guess I will update just to update I always like to keep things updated. If there are any issues when I do update then I will be posting again. Thanks again

idata
Esteemed Contributor III

Well I just updated the firmware all went well.One thing I did notice is my media wearout indicator is 100 and when I got the drive new it was 99

idata
Esteemed Contributor III

I just wanted to add that I have an 120GB ssd and a 80GB ssd for storage and the firmware update found them both no issues.