cancel
Showing results for 
Search instead for 
Did you mean: 

1.7 update

idata
Esteemed Contributor III

My system is running fine is there a need to upgrade to the lastest firmware?

12 REPLIES 12

idata
Esteemed Contributor III

I just intalled an x25m 160gb ssd and it's running great; but when I try to update the firmware it says "no intel ssd found or disabled" What do I do now?

idata
Esteemed Contributor III

You need to tell us what your PC configuration is, such as mother board model and what interface you are using for your SSD before we can offer any assistance.

idata
Esteemed Contributor III

Set SATA Mode to IDE (or Compatibility). Apply update and then restore the mode.

SKlin
New Contributor

Just installed the firmware update on my 80 gig and 40 gig ssds. Was easy and worked well.

idata
Esteemed Contributor III

skline00, Sounds good, but just for our information, was your 40GB SSD of the new 'V' line of SSDs?