cancel
Showing results for 
Search instead for 
Did you mean: 

Can some of you post your POST firmware crystal disk results for 80 gig G2

idata
Esteemed Contributor III

Would be nice to see the range of performance for that drive after the firmware update.

25 REPLIES 25

idata
Esteemed Contributor III

Smoothmole,

How many drives does that measure represent?

Regards,

Mike

idata
Esteemed Contributor III

It's 11 drives - not SSD (1 TB ea WD RE3s).

Here is my SSD - not attached to the RAID card (because I won't get TRIM). Running off of an Asus P5Q Deluxe, default Windows Drivers.

idata
Esteemed Contributor III

Can anybody think of a reason why my crystal marks are low? especially the 4Kread.

Was the same before the update to 02HD

I'm using 80GB G2 drive in a Dell E6400. All drivers are correct per the many posts on this site

idata
Esteemed Contributor III

Here's mine, Dell XPS 1330

---------------------------------------------------------------

CrystalDiskMark 3.0 x64 Beta1 (C) 2007-2009 hiyohiyo Crystal Dew World : http://crystalmark.info/--------------------------------------------------------------- Sequential Read : 240.933 MB/s Sequential Write : 86.559 MB/s Random Read 512KB : 188.210 MB/s Random Write 512KB : 79.490 MB/s Random Read 4KB (QD=1) : 17.806 MB/s [ 4347.2 IOPS] Random Write 4KB (QD=1) : 40.574 MB/s [ 9905.6 IOPS] Random Read 4KB (QD=32) : 121.290 MB/s [ 29611.7 IOPS] Random Write 4KB (QD=32) : 94.265 MB/s [ 23014.0 IOPS] Test : 100 MB [C: Used 29.2% (43.5/148.9 GB)] Date : 2009/12/02 0:10:21 OS : Windows 7 Ultimate Edition [6.1 Build 7600] (x64)

idata
Esteemed Contributor III