cancel
Showing results for 
Search instead for 
Did you mean: 

Intel 510 elm crest 120gb SSD Help...

idata
Esteemed Contributor III

i got a question the reason i change in my efi bios to ahci rather ide was because i seen a major increase in read/write speeds...now let say if i get another ssd to make it much faster and majorly more space should i raid it?? and if i do then how will this effect my hhd's i have and my dvdrwr i have on the sata ports??? please any help would be great,...thanks...this is my setup just incase you guys want to see my built:::: http://youtu.be/PJA9YDKE8Hc http://youtu.be/PJA9YDKE8Hc

20 REPLIES 20

idata
Esteemed Contributor III

im using the intel rapid storage technology 10.1.0.1008 for sata...

im using windows 7 home premuim...

its plugged into the 6gbps sata port on my asus motherboard...http://www.asus.com/Motherboards/Intel_Socket_1155/P8H67M_PRO/ http://www.asus.com/Motherboards/Intel_Socket_1155/P8H67M_PRO/

is this good??

can you specify the run to 0 proceedure please...cmd or regedit??

idata
Esteemed Contributor III

You need to run "fsutil behavior query disabledeletenotify" from within cmd.exe (and be sure to run cmd.exe as Administrator).

idata
Esteemed Contributor III

"fsutil behavior query disabledeletenotify" only tells you that the TRIM command is being sent by the OS. It does not necessarily mean it is being executed by the SSD.

idata
Esteemed Contributor III

i typed in that and it now indicates that " disabledeletenotify =0"

im not sure what this means?

idata
Esteemed Contributor III

I means the OS is sending the trim command to the SSD. It does not mean that the SSD is executing that command.