cancel
Showing results for 
Search instead for 
Did you mean: 

Want to align partition on 160GB SSD for XP... can't run Diskpar.exe

idata
Esteemed Contributor III

I used Diskpar.exe successfully a few months back, but when I try to run it now I just get a momentary flash... very short, can't see any text. Same result on all 5 computers I've tried. And, my "Diskpart" apparently doesn't have an "align" parameter, so that doesn't work either.

Any ideas of what to try next?

TIA

2 REPLIES 2

idata
Esteemed Contributor III

Have you read thread /thread/14108?tstart=0 Paragon Alignment Tool (PAT) ?

Remember:

Always clone or take a full backup of an HDD/SSD before running anything like PAT.

Since you mentioned XP, you also may be interested in thread /thread/14145?tstart=30 Easy way to Enable AHCI on XP running in IDE mode . Note that first post is garbled so start reading at corrected second post.

idata
Esteemed Contributor III

Thanks for the response.

Seems I encountered PAT a couple of days too late.. :>)

I believe my rig is already running in AHCI mode... won't boot if other is selected.