AX200 only connects with 80Mhz to my Wifi Access Point which is capable of 160 Mhz

[usefulvid]

I am using AX200 via the M.2 Slot.

Driver Version is 21.70.0.6

Access Point is FritzBox 6660

https://en.avm.de/products/fritzbox/fritzbox-6660-cable/technical-specifications/

It always connects with 80Mhz I also manually allowed 160 Mhz in my access point. Is there a specific channel which must be used?

[AlHill]

Fritzbox is always a problem.

Read this: https://forums.intel.com/s/question/0D50P00004ZuT1d/intel-ax-200-wird-mit-80-mhz-und-nicht-mit-160-mhz-angezeigt-warum

Doc

[usefulvid]

Thanks for the Link but this is already activated on my site:

I think this is what is the solution from the other thread but this does not solve my problem

[AlHill]

Did you add the AX200 to your laptop or did the laptop come with the AX200?

Doc

[usefulvid]

added manually

[AlHill]

Well, that is part of the problem. You cannot add the adapter of your choice without consulting with the laptop manufacturer for compatibility.

Doc

[usefulvid]

The laptop has an m.2 slot for wifi cards, driver installation worked flawlessly

[AlHill]

Then, why do you have problems?

Doc

[usefulvid]

AVM could solve it. Radar transmission from a nearby weather station.

The AX200 is working fine and not "part of the problem".