Connected to stopped target Intel SoC FPGA - Arria 10 SoC
cd "C:\Users\engineering\HD-MRPS\Linux_Boot\Han_Pilot2"
Working directory "C:\Users\engineering\HD-MRPS\Linux_Boot\Han_Pilot2"
Execution stopped in SVC mode at S:0xC0714BF0
S:0xC0714BF0   LDRH     r3,[r0,#0]
set substitute-path "/home/richardg/C-130J/HD-MRPS/software/pallabi/u-boot-socfpga_han2/u-boot-socfpga/arch/arm/include/asm/arch" "C:\Users\engineering\HD-MRPS\Linux_Boot\Han_Pilot2\u-boot-socfpga\arch\arm\mach-socfpga\include\mach\"
source /v "C:\Users\engineering\HD-MRPS\Linux_Boot\Han_Pilot2\debug-u-boot-A10.ds"
+stop
WARNING(CMD315): Target is not running
+wait 5s
+reset
+stop
WARNING(CMD315): Target is not running
+wait 5s
+set trust-ro-sections-for-opcodes off
+restore u-boot-socfpga/spl/u-boot-spl-dtb.bin binary 0xFFE00000
Restoring Binary file C:\Users\engineering\HD-MRPS\Linux_Boot\Han_Pilot2\u-boot-socfpga\spl\u-boot-spl-dtb.bin into memory
	Restoring section S:0x00000000 to S:0x00013FCF into memory S:0xFFE00000 to S:0xFFE13FCF
Target has been reset
Execution stopped in SVC mode at S:0x00000000
S:0x00000000   LDR      pc,[pc,#24] ; [0x20] = 0xB8
+symbol-file u-boot-socfpga/spl/u-boot-spl
+set $PC = $ENTRYPOINT
+thbreak *0x0
Hardware breakpoint 1 at S:0x00000000
+continue
+wait 60s
Execution stopped in SVC mode at S:0xFFE00000
In boot0.h
S:0xFFE00000   10,0   ARM_VECTORS
+restore u-boot-socfpga/spl/u-boot-spl-dtb.bin binary 0xFFE00000
Restoring Binary file C:\Users\engineering\HD-MRPS\Linux_Boot\Han_Pilot2\u-boot-socfpga\spl\u-boot-spl-dtb.bin into memory
	Restoring section S:0x00000000 to S:0x00013FCF into memory S:0xFFE00000 to S:0xFFE13FCF
+symbol-file u-boot-socfpga/spl/u-boot-spl
+set $PC = $ENTRYPOINT
+thbreak spl_boot_device
Hardware breakpoint 2 at S:0xFFE00F98
	on file spl_a10.c, line 78
	on file spl_a10.c, line 79
	on file spl_a10.c, line 79
+continue
+wait 60s
Execution stopped in SVC mode at S:0xFFE00000
S:0xFFE00000   10,0   ARM_VECTORS
+delete
All user breakpoints deleted
+loadfile u-boot-socfpga/u-boot
Target Message: Memory access caused precise abort.
Debug Precise Abort Registers : DFSR = 0x00000808, DFAR = 0x01000040
ERROR(CMD16-TAD59-NAL18): 
# in C:\Users\engineering\HD-MRPS\Linux_Boot\Han_Pilot2\debug-u-boot-A10.ds:27 while executing: loadfile u-boot-socfpga/u-boot
! Failed to load "u-boot"
! Download of 467,860 bytes to address S:0x01000040 failed while writing block of 4,096 bytes to address S:0x01000040
! Bus error on memory operation.
ERROR(CMD656): The script C:\Users\engineering\HD-MRPS\Linux_Boot\Han_Pilot2\debug-u-boot-A10.ds failed to complete due to an error during execution of the script