Embedded Connectivity
Intel network controllers, Firmware, and drivers support systems

i226-IT NVM update

sruby11
Novice
513 Views

Hello,

I have an i226-IT on an XMC card we are developing. I can't find the iNVM text file for this device anywhere.

We are also using an i210-CS, and I was able to download the 513655_I210_I211_Production_images.zip file and modify and build with  the I210_Invm_SerDesKX_NoAPM_v0.6.txt file

Can someone point me to the iNVM files for the i226 please?

 

Thank you,

sruby11

0 Kudos
1 Solution
sruby11
Novice
405 Views

Hi  @CarlosAM_INTEL,

I was able to update the LED registers (and MAC Address) using the LANConf utility after programming the Flash with the FXVL_125D_IT_2MB_2.25.bin file from the link you provided.

Thank you very much for your help!

Regards,

@sruby11 

View solution in original post

0 Kudos
5 Replies
CarlosAM_INTEL
Moderator
480 Views

Hello, @sruby11:

 

Thank you for contacting Intel Embedded Community.

 

We have received your request, but we want to address the following question to have a better idea of the situation:

 

Could you please let us know the part number and name of the manufacturer of the processor related to your XMC card implementation?

 

We are waiting for your reply.

 

Best regards,

@CarlosAM_INTEL

0 Kudos
sruby11
Novice
478 Views

Thank you for the response @CarlosAM_INTEL 

The XMC card in connected to a SBC with an Intel Xeon W-11865MRE.

 

Best,

@sruby11 

0 Kudos
CarlosAM_INTEL
Moderator
474 Views

Hello, @sruby11:

 

Thanks for your reply.

 

The information that may help you can be found on the following website:

https://cdrdv2.intel.com/v1/dl/getContent/686540

 

Best regards,

@CarlosAM_INTEL.

0 Kudos
sruby11
Novice
422 Views

Thank you @CarlosAM_INTEL but those are all binary files. I was looking for .txt files so I can customize some register values (LED Configuration 0x001C and 0x001F).

0 Kudos
sruby11
Novice
406 Views

Hi  @CarlosAM_INTEL,

I was able to update the LED registers (and MAC Address) using the LANConf utility after programming the Flash with the FXVL_125D_IT_2MB_2.25.bin file from the link you provided.

Thank you very much for your help!

Regards,

@sruby11 

0 Kudos
Reply