XeonD-1518 processor for new design

[Charan1]

Hi,

Please let us know if the XeonD-1518 processor can be used for new designs.

[Charan1]

Hi, could someone please suggest on this?

[Diego_INTEL]

Hello @Charan1,

Thank you for contacting Intel Embedded Community.

The D-1500, Grangeville is not actively supported anymore:

https://www.intel.com/content/www/us/en/support/articles/000022396/processors.html

But you may consider the Intel® Xeon® D-1700 and D-2700 processors:

https://www.intel.com/content/www/us/en/products/docs/processors/xeon-d/intelligent-iot-edge-product-brief.html

Best regards,

@Diego_INTEL

[Charan1]

Hi @Diego_INTEL ,

Thanks for your reply. Please let us know if SW built for D-1500 can be ported to  Intel® Xeon® D-1700 and D-2700 processors with minimal changes.

Regards,

Charan.

[Diego_INTEL]

Hello @Charan1,

As the D-1700 is an upgrade for the D-1500, the software environment may be compatible, but it may be best to test it. You may use an RVP, it can be requested from an Intel Sales Representative.

https://www.intel.com/content/www/us/en/products/docs/processors/xeon-d/network-segments-product-brief.html

"Upgrade Path from Previous Intel® Xeon® D Processors
The Intel® Xeon® D-2700 processors are the successors to Intel® Xeon® D-2100 processors, while the Intel® Xeon® D-1700 processors replace Intel® Xeon® D-1500 and D-1600 processors. In all cases, the upgrades provide significant, balanced, cost-effective improvements across compute, memory, and I/O."

Best regards,

@Diego_INTEL